- dotTech - http://dottech.org -

How to root Samsung Galaxy Note 3 (AT&T) on Android Jelly Bean [Guide]

Posted By Godwin On October 11, 2013 @ 7:32 AM In Android Root Guides | 6 Comments

Samsung_Galaxy_Note_3 [1]This guide will help you to get your AT&T Samsung Galaxy Note 3 rooted. Rooting will help you get to the core of your device and shell out its juice.

Disclaimer: This guide is intended as a helpful “how to”. dotTech and its writers are not responsible for any gain or loss (including but not limited to bricked devices) incurred as a result of following this guide. Root your device at your own risk. Rooting may void your warranty. Proceed at your own risk.

Requirements

This root guide is applicable only for AT&T Samsung Galaxy Note 3 (model number SM-N900A). Please be careful to only try this on that device. Proceed at your own risk.

Before We Begin

Before starting off with the guide, get yourself ready with the following:

  • Download and install Samsung Galaxy Note 3 drivers [2] (if you haven’t done so already). Restart your PC after the driver installation.
  • Download Root_de_la_Vega.7z [3] (2.2GB file) to your computer. Extract this file to obtain 5 files (Root_de_la_Vega.zip, Root_de_la_Vega.tar, N900AUCUBMI1_OneClickBin.exe, Odin3 v3.09.exe, and Odin3.ini).

How To Root AT&T Samsung Galaxy Note 3

  • Remove the external sdcard, in case you have one.
  • Switch off the device.
  • Take out the battery and the USB cable (if its already plugged in).
  • Wait for about 10 seconds and re-insert the battery.
  • Boot into Download Mode by keeping the ‘Volume Down’, ‘Home’ and ‘Power’ buttons pressed (Volume Down + Home + Power), until you see a Warning! screen. Then, press the ‘Volume Up’ button to enter Download mode.
  • Open the file N900AUCUBMI1_OneClickBin.exe, which you had extracted earlier.
  • Plug-in the device to your computer using a USB cable.
  • After you plug-in the device, the box at the top of Odin (the application you just ran), will turn yellow and the message ‘Added’ should appear in the message box in Odin.
  • Click Start and wait for the process to finish.
  • Wait till your device restarts.
  • Plug out the USB cable.
  • Enter into Download Mode again, as earlier.
  • Now, open the file Odin3 v3.09.exe.
  • Connect the device to your computer.
  • Now, the first box at the top of Odin, i.e, ID:COM will turn yellow and the message ‘Added’ should appear in the message box in Odin.
  • On the Odin window, click on ‘AP‘ and select the file ‘Root_de_la_Vega.tar‘.
  • Take care not to change any other setting.
  • Click on the Start button to start the flashing.
  • Wait till the process finishes and “PASS” status is displayed in Odin.
  • Wait for the device to reboot.
  • Extract the contents of Root_de_la_Vega.zip to obtain:
    • root_de_la_vega.sh
    • root_files (folder)
  • Copy these 2 files to the ROOT of your device’s internal sdcard.
  • Restart your device.
  • After your device has restarted successfully, delete the 2 files which you had just placed in the root of your device’s internal sdcard.
  • Now, restart your device again to complete the rooting process!
  • You may now insert back your external sdcard.

Conclusion

Enjoy your rooted sweet AT&T Samsung Galaxy Note 3!

[via XDA [4]]


Article printed from dotTech: http://dottech.org

URL to article: http://dottech.org/131102/how-to-root-samsung-galaxy-note-3-att-guide/

URLs in this post:

[1] Image: http://dottech.org/131102/how-to-root-samsung-galaxy-note-3-att-guide/samsung_galaxy_note_3/

[2] Samsung Galaxy Note 3 drivers: http://d-h.st/zpw

[3] Root_de_la_Vega.7z: https://www.copy.com/s/HRWPs/Root_de_la_Vega.7z

[4] XDA: http://forum.xda-developers.com/showthread.php?t=2474422

© 2008-2012 dotTech.org | All content is the property of its rightful owner.