- dotTech - https://dottech.org -

How to root Samsung Galaxy Core Prime SM-G360G on Android 5.1.1 [Guide]

Samsung-Galaxy-Core-Prime [1]These are the steps to root Samsung Galaxy Core Prime SM-G360G running on the Android 5.1.1 Lollipop software update with the help from the Odin flashing tool and Chainfire’s CF-Auto-Root.




  1. Download the new CF-Auto-Root package for the G360G on 5.1.1 from this link [3].
  2. Extract the file on the desktop of the computer. You should see the Odin flashing tool and the rooting exploit.
  3. Double-click the Odin executable and run the same so it’s open on the desktop and ready to use.
  4. Turn off the smartphone and reboot it in download mode.
  5. Connect the Samsung Galaxy Core Prime to the computer with the USB cable.
  6. Wait a few seconds fr the USB Drivers to start working and then check the drivers did work by looking for the “added” message.
  7. Click the AP button and browse the desktop for the rooting exploit you extracted to the desktop earlier.
  8. Make sure the Auto Reboot and the F Reset Time option are on and the Re-partition option is off.
  9. Click the Start button when you are ready for the flashing to begin.
  10. Wait until you get the ‘pass’ message from the Odin app on the computer and then check the Samsung Galaxy Core Prime’s display for when it says it is about to reboot in 10 seconds.

Every Samsung Galaxy Core Prime should now reboot in recovery mode; any device that does not get in recovery mode must get there manually using the hardware key combination. You can boot to recovery mode by turning off the device and then holding the Volume Up + Home + Power buttons when rebooting.